The effect of traffic data source on deterioration rates of heavy-duty flexible pavements

The purpose of this study is to assess the effect of traffic data source (estimated vs. actual) on predicted progression rates of roughness and rutting for heavy-duty flexible pavements of rural freeways. Progression rates are predicted using calibrated HDM-4 models. The assessment is performed in terms of variations in maintenance intervention timing associated with the variations in progression rates. Time series pavement condition data (covering 3–5 years) have been collected for 7 sections of rural freeways for use in calibrating HDM-4 deterioration models. They range in length from 10 to 60.8 km and cover different traffic volumes, climate zones and subgrade soil types. For these sections, estimated annual average daily traffic (AADT), growth factors and assumed loading have been extracted from relevant database. Only six segments of these sections have Weigh-in-Motion (WIM) sites so relevant actual AADT, growth factors and axle load distributions have been extracted from WIM reports. The results of running the calibrated HDM-4 deterioration models using different traffic data show that actual traffic data from WIM sites result in higher rates of deterioration to that of estimated data for four sites, resulting in earlier intervention timing and higher present value agency cost. The other two sites have lower rates with actual data due to lower traffic loading than estimated.     

Data envelopment analysis based on team reasoning

Existing approaches to data envelopment analysis focus mainly on the derivation of the efficiency of the individual decision‐making unit (DMU) or on the calculation of the weights of multiple inputs or outputs, but pay little attention to the team interest of all the DMUs. Motivated by the idea of team reasoning, in which the benefit of the team is of higher importance than that of each individual, this paper considers all the DMUs as a team and introduces the team indexes including the overall efficiencies, variance, boundaries of all the DMUs, and relationships between DMUs. Several models are first developed to estimate values of the team indexes based on which decision makers can provide their preferences regarding them. Then, models are established to obtain the interval efficiencies of individual DMUs under the condition that the team indexes are satisfied. Several examples are given to illustrate the proposed approaches and verify their applicability.     

儿童用品TBT通报数据可视化预警研究

探索采用数据可视化技术分析儿童用品TBT通报数据,以可视化图形图像呈现通报热点并揭示趋势信息,提出对策与建议,助力为儿童用品产业升级、TBT预警数据分析和信息传播工作提供新思路,提高中小企业的国外市场准入机会。     

Investigation of seasonal variations of Beijing pavement condition data using unevenly spaced dynamic panel data model

Beijing municipal highway administration started to collect pavement condition data on its major expressways since 2006. It is advised in the Chinese practice standard that data collection shall be conducted on annual basis. However, pavement data are usually collected at different seasons of the year, which may cause significant seasonal variations in the observed condition. Moreover, for some reasons, data are missing for some of the pavement sections at certain years, which could bring up difficulties in performance model estimation and inference. These concerns have been simply neglected in past practice. This study proposed an unevenly spaced dynamic panel data model to investigate the seasonal patterns of a performance indicator called Ride Quality Index (RQI). A quasi-differencing approach was adopted for the estimation. Data collected from the 5th Ring Road of Beijing were used in the case study. It was found that RQI data collected during the fall season are expected to be lower than that collected during the spring or summer seasons. Findings from this research would be helpful to pavement engineers in using unevenly spaced pavement condition data for future condition estimation.     

Sustainability assessment of Iranian petrochemical companies in stock exchange: A data envelopment analysis-based approach

The assessment of efficiency is always of particular importance according to different indicators from different perspectives. There are various techniques for evaluating petrochemical companies, among which the data envelopment analysis technique is one of the best techniques that can be used to calculate the relative efficiency of a set of decision-making units with network structures. In the present paper, seven petrochemical companies listed in the Iranian stock exchange were analysed. These companies were evaluated in terms of financial performance and sustainable development, and their relative efficiency was calculated during 2015–2016. According to the obtained results, only Marun Petrochemical Co. was found to be efficient in all areas and years. The results also showed that four companies were efficient in financial terms over the period under study. In the general conclusion regarding the companies' performance, Marun was ranked first, Jam was ranked second, and Zagros was ranked third.     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

煤田地震勘探中多井组合爆炸法浅析

地震勘探中炸药作为激发震源的激发条件多样,采用有效的震源激发方式,才能取得高信噪比的地震原始数据。本文依据有关爆破原理,理论结合实践经验,提出在厚黄土区采用多井组合的激发方式,能有效压制噪声,增强性噪比,提高数据质量。     

Empirical surveys of frontier applications: a meta‐review

This contribution is the first attempt to systematically review all empirical surveys that so far have been made available in the broad field of efficiency and productivity analysis using frontier estimation methodologies. We provide a systematic bibliometric review on the many empirical surveys in the field of efficiency and productivity analysis, the most relevant concepts, areas, overlaps, and potentials to explore from its introduction to the most recent surveys. We combine the United Nations’ International Standard Industrial Classification (ISIC) taxonomy for the economic activity with the Journal of Economic Literature (JEL) classification system to classify the empirical surveys and to identify the current gaps in the literature. In addition to the most relevant/generic potential areas for applications (according to the United Nation's ISIC), this methodology provides a cluster analysis with the most relevant concepts that have been considered so far (according to the JEL codes). This overview brings an interesting guide for future work to develop the whole field.     

A benchmark data set for two-phase Coriolis metering

For more than a decade there has been growing interest in the use of Coriolis mass flow metering applied to two-phase (gas/liquid) and multiphase (oil/water/gas) conditions. It is well-established that the mass flow and density measurements generated from multiphase flows are subject to large errors, and a variety of physical models and correction techniques have been proposed to explain and/or to compensate for these errors. One difficulty is the absence of a common basis for comparing correction techniques, because different flowtube designs and configurations, as well as liquid and gas properties, may result in quite different error curves. Furthermore, some researchers with interests in the modelling aspects of the field may not have suitable multiphase laboratory facilities to generate their own data sets. This paper offers a small data set that may be used by researchers as a benchmark i.e. a common data set for comparing correction techniques. The data set was collected at the UK National Flow Laboratory TUV-NEL, using air and a viscous oil, and provides experimental points over a wide flow range (8:1 turndown) and with Gas Volume Fraction (GVF) values up to 60%. As a first investigation using the benchmark data set, we consider how data sparsity (i.e. the flow rate and GVF spacing in the experimental grid) affects the accuracy of a correction model. A range of neural network models are evaluated, based on different subsets of the benchmark data set. The data set and some exemplary code are provided with the paper. Additional data sets are available on a web site created to support this initiative.     

Study on Thermal Deformation Measurement of Optical Remote Sensing Satellite Platform Based on Machine Vision

To solve the special requirements of the high orbit optical remote sensing-satellite for the thermal deformation of the platform, the thermal deformation test and measurement scheme of the satellite platform is designed. Through the comparative analysis of test results, the rationality of the thermal deformation design of the platform structure is verified. The results of thermal deformation measurement show that the maximum deformation of A camera mounting surface is 57.5~〃, and the maximum deformation of B camera mounting surface points to 79.3~〃, which can be used as the basis for thermal deformation prediction of satellite during the orbit operation.